SoCalTerminators.com Forums  

Go Back   SoCalTerminators.com Forums > SoCal Terminators General Forums > Local Shops Grapevine

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-08-2005, 08:47 PM
dgussin1's Avatar
dgussin1 dgussin1 is offline
GT500 > 08 F450> 03 Cobra
 
Join Date: Mar 2004
Location: Chicago, Il
Posts: 3,094
Stay Away From Shawn Ellis And Socaldiablo

This happened about 4-5 months ago. I have been keeping it to myself because I don't like to talk bad, but fuggit. He told my friend that he was gonna "kick my ass". What a ****ing loser.



Here is a little story that I have told people about Shawn Ellis of socaldiablo aka socaltuning & performance:



First off, on my 03 Cobra I purchase a KB, 60 lb injectors, a custom oil catch can from superior (man it was ugly) and an install from Shawn/superior as well as a dyno tune. When I got the car back I drove it for 3 days and it blew up. The car never felt right, it felt weaker than my non ported 2.8 eaton, but the dyno said it has 583rwhp. Shawn blamed the engine blowing on my driving and that it was my fault and that it had nothing to do with the install or the tune. He wouldn't even have my eaton reinstalled for free so I could take it to the dealer to get a new motor. I had just paid them $750 to install that blower, and they basically said to **** off. Strike 1.



Next up after I got my car fixed, I sold it. The car never felt the same again. The engine installer did something wrong and it was all screwed up.



About a month later, he blew up my friends bolt on cobra. (combatstang) Shawn told him that he had clogged cats and thats why it blew up. (yeah right) Marc still goes to him, why I dont know? He still believes that his cats were clogged and thats why his motor blew. Strike 2.



So I get another cobra, and planned to keep it stock for a few thousand miles. During that time I sold my KB since I wanted one of the new ones that doesn't spray oil. So I call Shawn up and told him I want a new KB. He tells me that it's gonna be $3200 for the KB with no bap or chip. He tells me that he can have it on monday. I agreed and told him I would come down on monday to pay him and pick up the blower. (KB is about 30 miles from him, so he just has to go pick one up.) Later that same day, my step dad calls up Shawn and tells him that he wants a KB for his v10 f350. So Shawn tells him that it'll be $3750 with a chip and BAP and he can have it for him on Monday too. So he agrees. (this was the thursday before)



On Monday, I call Shawn to confirm that he will have the blowers for us to come get them. He says that he'll have them both by 3pm.



So we head down, with cash in hand to get our blower. We get there and Shawn is no where to be found. I called him a few times and he finally called me back. He said that he was 1/2 hour away. So he arrives with the blower. We go and talk to him and he says that the f350's isn't going to be ready for another week. (OK, shit happens, right? BFD). My step dad tells him that he'll pay him now and just come to get it next week.



He goes to his truck and to give me my blower. He hands me a blower that wasn't in a box and was just sitting on the floor of his truck.(If he just got it from KB, why isn't their a box?) I look it over and it has some scratches on it and it looked like it had been mounted on a car before. Where the blower bolts to the manifold it looked as if it had been bolted down. It gave me a bad feeling in my stomach since I was 99% sure it was used. But I really didn't care, all I wanted was to get my KB and put it on my car. I just wanted something!



So I hand him mine and my stepdads money (literally $6950 cash). He counts it and pulls out a piece of paper. He starts writing. He writes "Cobra, $3799, minus $200 for chip and $100 for bap. $3499." Then he writes down "F350 $3950", and says that my stepdad is gonna need xyz for another $200. So he looks at me and says that I owe him another $300 and that my stepdad owes him another $400. I tell him that this wasn't the price we agreed upon and that I wasn't going to pay him more money. He tries to feed me some BS about how KB charged him more than they usually do and that he can't "lose money on the deal". Now we both know that he isn't paying list for these blowers. I told him that I don't have any more money, and I am not spending more money for something that looks used. My step dad basically says the same thing. He isn't paying more then he quoted him.



He basically tells me that I have 2 choices. I can leave today with the blower and pay him the rest of the money later or I can give him the blower and never deal with him again. So I walked over to my car, grabbed the blower, handed it to him, took my cash and walked away.



I wasn't about to pay more money for a blower that was used when I could get a new one cheaper on my own.



So thats my Shawn Ellis story. He blew my car up, blew a friends car up, and tried to rip me and my stepdad off. I can't believe that I was still gonna let him tune my car after he blew it up.



If you still want to use that guy after hearing this I would be surprised. I have talked to so many more people that have similar storys to mine. He is a dishonest guy that doesn't know how to tune. He doesn't even know how to set up a proper timing curve and doesn't tune the a/f through the MAF transfer function.



David
__________________
2007 Shelby GT 500 White w/ Blue Stripes Coupe -
571rwhp 543rwtq SAE
1.62 60' 11.41 @ 125.71 - ET Streets
1.91 60' 11.86 @ 125.26 - Street Tires

1.64 60' 11.59 @ 118.22 - ET Streets (Stock Pulley)
#820 of 8150 coupes #189 of 2250 white coupes


2004 Black Cobra Convertible (gone )
616rwhp /570rwtq SAE KB 2.2 at 19psi
7.24 @ 93 11.3 @ 123 missing 3rd (2500' DA on 17" DR's)


link to all of my video's
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -7. The time now is 09:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
copyright 2004 Novus Technic, Inc.